Manual point control

In a previous post i described the manual point control switches i made for Crookwell.For the point control on the rest of the layout i have changed the setup slightly.The switches are now mounted under the points instead of at the edge on the facia & the method of control is now by a small brass knob connected to a length of brass rod to the switch.The mounting brackets are 20mm alloy angle with a slot machined on 1 side to fit the switch.The switches i have used are perfect in the throw for the peco points(jaycar part No.ss0821 slide mini DPST)and for wiring up the frog power.Anyhow till next time Booly